Outdoor Speed Dome CameraUser ManualAccessoriesCA-510GCA-510WCA-510CCA-510P25CA-510P50CA-510PMLCA-510PMSCA-510PA25CA-510PA50CameraCM-512www.openeye.ne
10 Schedule ... 54 Switc
31362AC 11 INTRODUCTION OVERVIEW OpenEye’s 36x Outdoor PTZ Dome, an IP66-rated weatherproof camera, is an excellent solution for outdoor PTZ surveil
12 GENERAL OPERATION REQUIREMENTS A minimum of one control device is required for operation, such as a control keyboard, or a recorder. The CM-512 in
31362AC 13 GETTING STARTED BOX CONTENTS Before proceeding, please check that the box contains the items listed here. If any item is missing or has
14 CAMERA OVERVIEW Before installing or connecting the dome camera, please refer to this section and complete preparations for dome setup and all swi
31362AC 15 Preparations for Dome Setup The following installation procedure is for the outdoor dome equipped with the sunshield housing. Please foll
16 Connections The dome ID and communication switch settings must be set before connecting the dome camera to other CCTV devices. These switches are
31362AC 17 Communication Switch Communication Switch SW1 RS-485 Setting SW2 SW3 Termination SW4 Line Lock SW5 System Initialization SW6 Reserv
18 Protocol Switch Define the protocol you are going to use based on the devices of your surveillance system. Generally, use one protocol even if the
31362AC 19 Power Connector Refer to this diagram for power connector definition before wiring. 1 AC IN + 2 Frame GND 3 AC IN - Apply Alarm I/O
20 RS-485 Connector Definition The dome camera uses the RS-485 interface to communicate with a connected control device. Connect a control keyboard
31362AC 21 OPERATIONS AND CONFIGURATION OSD FORMAT The information displayed on the screen is described in terms of OSD, position, and function desc
22 OSD MENU TREE The OSD setup menu structure of the 512 dome camera is listed below. The star symbol indicates the factory default. For detailed fun
31362AC 23 Item Layer 1 Layer 2 Layer 3 Default AE MODE EXPOSURE COMP. <OFF>, EXPOSURE VALUE: <-10.5dB> ~ <10.5dB> OFF EXIT +
24 Item Layer 1 Layer 2 Layer 3 Default WBC MODE AUTO (Auto White Balance) ☆ INDOOR OUTDOOR ATW (Auto-tracing WBC) MANUAL R GAIN <000&g
31362AC 25 Item Layer 1 Layer 2 Layer 3 Default TELE-METRY CTRL FLIP <OFF>, <M.E.>, <IMAGE> OFF EXIT + SET: YES ANGLE ADJUSTER
26 Item Layer 1 Layer 2 Layer 3 Default AUTOSCAN AUTOSCAN LINE <1> ~ <4> 1 START POINT <PT MOVE >, <TO SAVE> END
31362AC 27 Item Layer 1 Layer 2 Layer 3 Default ALARM SETTING ALARM PIN <1> ~ <4> 1 ALARM SWITCH <ON>, <OFF> OFF
28 Item Layer 1 Layer 2 Layer 3 Default PRIVACY MASK PRIVACY SWITCH <ON>, <OFF> OFF TRANSPARENCY <ON>, <OFF> OFF CO
31362AC 29 Item Layer 1 Layer 2 Layer 3 Default TIME SETTING TIME DISPLAY <ON>, <OFF> OFF SET YEAR <00> ~ <99>
31362AC 3 Outdoor High-Speed Dome Camera (CM-512) User Manual Manual Edition 31362AC –AUGUST 2013 ©2013, OPENEYE All Rights Reserved. No par
30 CONFIGURATION MENU The detailed functions and parameter settings of your high speed dome can be set through the OSD (On Screen Display) menu with
31362AC 31 Language The camera supports multi-language OSD function; the available languages include English, Japanese, Portuguese, Spanish, French,
32 Focus The focus of the dome camera can be operated in two modes: Auto Focus and Manual Focus. Auto The optimum focus is achieved by the internal
31362AC 33 WBC (White Balance Control) Mode The unit for measuring the color temperature ratio is Kelvin (K). you can select one of the White Balanc
34 Image Digital Zoom With this item, users can enable or disable the 12x Digital Zoom. The Digital Zoom will be activated after the full Optical
31362AC 35 Image Inverse Users can select ON to make the displayed image inversed vertically and horizontally. Occasions to employ the function incl
36 Telemetry Control Flip Users can track an object continuously when it passes through under the dome camera with setting Flip to IMAGE (digital f
31362AC 37 PT Position PT Position can display the Pan/Tilt position of the dome camera on the screen. • PT Display – Enable this time to display
38 OSD Auto Close Use this function to set your camera to turn off the on-screen display (OSD) after a period of inactivity. set the OSD to close au
31362AC 39 Title Display You can name a view area and the title will be displayed on screen for easy recognition. On – Display the title set for a v
4 Important Safeguards 1. Read Instructions Read all of the safety and operating instructions before using the product. 2. Retain Instructions Save
40 Preset You can set up to 256 preset points by following these instructions. Tip You can set preset points through the keyboard. Refer to the cont
31362AC 41 Tour This function executes pre-positioning of the pan, tilt, zoom, and focus features in a given tour for a camera. Before setting this
42 Run Tour Run the tour line manually. Exit Select the item to exit the TOUR menu and go back to MAIN PAGE 2 to carry on setup of Autoscan. Note Y
31362AC 43 End Point Set the end point after the start point is defined. Pan the camera to another position and press ENTER to save the position as
44 Pattern A pattern is a route that can be stored and recalled to execute repeatedly. Pattern Line Create up to eight Pattern paths with the came
31362AC 45 Exit Exit the PATTERN menu and return to MAIN PAGE 2 to continue setting up the Home setting. Note You can execute the pattern function
46 Preset Point Select a preset point where the dome should go after the Return Time function is activated. The preset point(s) should be set prior e
31362AC 47 IR Function (Removable IR Cut) With the IR cut filter, the dome can still catch a clear image at night or in very dark lighting condit
48 Alarm Setting The integrated high speed dome camera provides eight alarm inputs and one alarm output (NO or NC) to connect with alarm devices. Wit
31362AC 49 Alarm Type There are two alarm types: Normally Open and Normally Closed, which are illustrated here. Select an alarm type that correspon
31362AC 5 Installation and Storage • Do not install the camera in areas of extreme temperatures in excess of the allowable range. ( -58°F ~ 122°F /
50 Dwell Time The Dwell Time is the duration of execution for an alarm action. If the PRESET mode is selected, the camera will always return to the s
31362AC 51 Privacy Mask The purpose of the Privacy Mask function is to avoid any intrusive monitoring. Users can adjust the camera view position usi
52 Set Mask After pressing ENTER to enter the sub-menu of the SET MASK, the dome will memorize the present position as the privacy mask position. Up
31362AC 53 Clear Mask To delete a preset mask zone, follow these steps. 1. Select the mask zone that will be erased. 2. Press ENTER to confirm the
54 Schedule The Schedule function enables users to program a preset point or function (Tour, Autoscan, or Pattern) automatically to be executed in a
31362AC 55 Schedule Reset Select YES to reset the entire schedule. Exit Exit SCHEDULE and return to MAIN PAGE 3. Exit OSD To exit the OSD setup me
56 APPENDIX A: SPECIFICATIONS CAMERA SPECIFICATIONS Model CM-512 Image Sensor 1/4” Sony CCD IP Rating IP66 Type / Format NTSC Wide Dynamic Range Ye
31362AC 57 Model CM-512 Input Voltage 24vAC ± 10% Weight 5.11 lbs (2.3 kg) Dimensions Ø7.5" (190.5mm) x H: 11.1" (282mm) Housing / Dome C
58 APPENDIX B: OSD MENU NOTES Item Layer 1 Layer 2 Layer 3 Notes LANGUAGE <ENGLISH>, <JAPANESE>, <PORTUGUESE>, <SPANISH>
31362AC 59 Item Layer 1 Layer 2 Layer 3 Notes AE MODE EXPOSURE COMP. <OFF>, EXPOSURE VALUE: <-10.5dB> ~ <10.5dB> EXIT + SAVE
6 Warning DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. Caution
60 Item Layer 1 Layer 2 Layer 3 Notes WBC MODE AUTO (Auto White Balance) INDOOR OUTDOOR ATW (Auto-tracing WBC) MANUAL R GAIN <000>
31362AC 61 Item Layer 1 Layer 2 Layer 3 Notes TELE-METRY CTRL FLIP <OFF>, <M.E.>, <IMAGE> EXIT + SET: YES ANGLE ADJUSTER MIN
62 Item Layer 1 Layer 2 Layer 3 Notes AUTOSCAN AUTOSCAN LINE <1> ~ <4> START POINT <PT MOVE>, <TO SAVE> END POIN
31362AC 63 Item Layer 1 Layer 2 Layer 3 Notes ALARM SETTING ALARM PIN <1> ~ <8> ALARM SWITCH <ON>, <OFF> ALARM
64 Item Layer 1 Layer 2 Layer 3 Notes PRIVACY MASK PRIVACY SWITCH <ON>, <OFF> TRANSPARENCY <ON>, <OFF> COLOR <
31362AC 65 Item Layer 1 Layer 2 Layer 3 Notes TIME SETTING TIME DISPLAY <ON>, <OFF> SET YEAR <00> ~ <99> SET
66 APPENDIX C: CAMERA ID SETUP Use this table to set the camera ID. ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 0 OFF OFF OFF OFF OF
31362AC 67 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 22 OFF ON ON OFF ON OFF OFF OFF OFF OFF 23 ON ON ON OFF ON OFF OF
68 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 48 OFF OFF OFF OFF ON ON OFF OFF OFF OFF 49 ON OFF OFF OFF ON ON OFF OFF
31362AC 69 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 74 OFF ON OFF ON OFF OFF ON OFF OFF OFF 75 ON ON OFF ON OFF OFF O
31362AC 7 TABLE OF CONTENTS Introduction ...
70 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 100 OFF OFF ON OFF OFF ON ON OFF OFF OFF 101 ON OFF ON OFF OFF ON ON OFF
31362AC 71 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 126 OFF ON ON ON ON ON ON OFF OFF OFF 127 ON ON ON ON ON ON ON O
72 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 152 OFF OFF OFF ON ON OFF OFF ON OFF OFF 153 ON OFF OFF ON ON OFF OFF ON
31362AC 73 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 178 OFF ON OFF OFF ON ON OFF ON OFF OFF 179 ON ON OFF OFF ON ON O
74 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 204 OFF OFF ON ON OFF OFF ON ON OFF OFF 205 ON OFF ON ON OFF OFF ON ON O
31362AC 75 ID Number Switch Setting 1 2 3 4 5 6 7 8 9 10 230 OFF ON ON OFF OFF ON ON ON OFF OFF 231 ON ON ON OFF OFF ON ON
31186AB www.openeye.net 1-888-542-1103 © 2013 OpenEye All rights reserved. No part of this publication may be reproduced by any
8 DNR ......... 34 Image Inv
31362AC 9 Speed ............................... 43
Comments to this Manuals