Openeye 200-Series Setup Manual User Manual download pdf

A : Focus adjuster

B : Field of view adjuster

A : Focus adjuster

B : Field of view adjuster

C : DIP switches

D : ALC adjustment

E : V-PHASE adjustment

ECE

Video

ALC

V-P

HASE

ALC

V-PHASE

L.L

D/N

AWB

BLC

AGC

High Resolution Camera CM-205/CM-205-L9

Standard Camera CM-201

L.L

D/N

AWB

BLC

AGC

INT

OFF

NORMAL

OFF

NORMAL

OFFFUNCTION ON

DC-IRIS Adjustment (ALC)

This is factory preset. It should not normally require adjustment.

Vertical Phase Adjustment (V-Phase)

Use this adjustment when using an 24vAC supply to align the camera phase with that of the power supply.

General Specifications

Model No.

Image Sensor

Imaging DSP

IP Rating

Type / Format

Wide Dynamic Range

Minimum Illumination

Day / Night

Horizontal TVL

Service Monitor Jack

S/N Ratio

Focal Length

Iris Control

Synchronization

Video Output

White Balance

Auto White Balance Range

Backlight Compensation

Auto Gain Control

Operating Temperature

Heater

Power Consumption

Rated Amperature

Input Voltage

Weight

Dimensions

Housing / Dome Cover

1/3” Sony SuperHAD

Sony SS-11X

IP55

NTSC

1.2 lux @ F1.6 (50 IRE)

Yes

500 TVL

48dB

4~9 mm

DC Type Auto IRIS Control

INT

1.0Vpp, 75Ω Unbalanced

Automatic White Balance

2500 K ~ 9700 K

Central Area for DC IRIS Lens

ON/OFF

14ºF ~ 122ºF (-10ºC ~ 50ºC)

3.2W (Max)

0.27A (12vDC) / 0.13A (24vAC)

12vDC / 24vAC (±10%)

0.6 lbs (0.27 kg)

Dome : ø3.9" (100 mm) x H: 2.1" (55 mm)

Housing: ø4.7" (120 mm) x H: 1.9" (50 mm)

White / Clear

1/3” Sony SuperHAD

Sony HQ-1

IP55

NTSC

0.6 lux @ F1.2 (50 IRE)

Yes

Day: 540 TVL / Night: 570 TVL

Yes, 2.5mm (3/32) T/S Jack

>50dB

3.3~12 mm 9~22 mm

DC Drive

INT / LL

1.0Vpp, 75Ω Unbalanced

AWB, AWB-EX

2700 K ~ 11000 K (AWB-EX 2000 K ~ 18000 K)

Center Area

AGC-EX / AGC Norm

14ºF ~ 122ºF (-10ºC ~ 50ºC)

4.2W (Max)

0.35A (12vDC) / 0.175A (24vAC)

12vDC / 24vAC (±10%)

0.6 lbs (0.17 kg)

Dome : ø3.9" (100 mm) x H: 2.1" (55 mm)

Housing: ø4.7" (120 mm) x H: 1.9" (50 mm)

White / Clear

1/3” Pixim Orca

Pixim

IP55

NTSC

Yes, 120dB Max Dynamic Range

0.6 lux @ F1.2 (50 IRE)

Yes (Auto, On, Off)

504+ TVL

Yes, 2.5mm (3/32) T/S Jack

>48dB @ F1.2, 50 IRE

3.3~12 mm

DC Drive

INT / LL

1.0Vpp, 75Ω Unbalanced

AWB, ATW, MWB, ATW-EX

2200 K ~ 7500 K (AWB-EX 2000 K ~ 11000 K)

Fully Adjustable

14ºF ~ 122ºF (-10ºC ~ 50ºC)

4.2W (Max)

0.35A (12vDC) / 0.175A (24vAC)

12vDC / 24vAC (±10%)

0.6 lbs (0.17 kg)

Dome : ø3.9" (100 mm) x H: 2.1" (55 mm)

Housing: ø4.7" (120 mm) x H: 1.9" (50 mm)

White / Clear

CM-201 CM-215CM-205 CM-205-L9

Camera Adjustments

ATTENTION: The information in this document is subject to change without notice. OpenEye shall

not be liable for technical, editorial errors or omissions contained herein.

Emissions

Immunity

FCC part 15 Class B

CE: EN55011

ICES-003

EN55022

CISPR 11

CISPR22

ANSI C63.4

CE: EN50130-4

FCC COMPLIANCE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against armful interference in a residential installation. This equipment generates uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced Radio/TV technician for help.

CISPR 22 WARNING: This is a Class B product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures.

POWER SUPPLY REQUIREMENTS: For use with listed Audio/Video product and only connected to

15W or less power supply. *Power supply should be a NEC Class 2 / LPS Supply.

EQUIPMENT MODIFICATION CAUTION: Equipment changes or modifications not expressly approved

by the manufacturer, the party responsible for FCC compliance, could void the user’s authority to

operate the equipment and could create a hazardous condition.

This class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Regulatory Compliance

Twist the controls on the side of the varifocal lens to adjust the focus and field of view settings.

Camera Setup

Please carefully read these instructions before using this product.

Save this manual for future use.

27790AG

Tamper Resistant Indoor

Dome Camera

CM-201

CM-205

CM-205-L9

CM-215

model no.

The bank of DIP switches allows the following settings to be made:

Line Lock (INT/LL)

In LL Mode, the V-Phase may be adjusted to compensate for connected supply phase differences. Only applicable

for 24vAC supply. When using a 12vDC power supply, the camera should be operated with INT (internal) sync.

DAY/NIGHT Mode (D/N)

When this switch is set to ON the camera will produce color images under normal lighting conditions. In reduced

light the camera will switch to Monochrome mode.

Auto White Balance (AWB Normal/AWB-EX)

AWB: The camera operates in the normal AWB range (2700 K ~ 11000 K).

AWB-EX: The camera operates in the extended AWB range (2000 K ~ 18000 K).

Flickerless Mode (FL/ON)

The camera reduces flicker in the image under fluorescent lighting.

Back Light Compensation (BLC)

When set to ON, this option improves the camera’s response to strong, unwanted lighting effects behind the

desired subject.

Low Light Sensitivity (AGC-EX/AGC Norm)

When set to EX, sensitivity in low light will automatically increased.

Selecting NORMAL will remove noise from the image, but will also limit the camera’s sensitivity.

1 2

Summary of Contents

Page 1 - Dome Camera

A : Focus adjuster B : Field of view adjuster A : Focus adjuster B : Field of view adjuster C : DIP switches D : ALC adjustment E : V-PHASE adjustment

Page 2 - Menu Map (WDR Camera CM-215)

With the exception of the focus and ﬁeld of view adjustments (made using controllers A and B) all settings for the Wide Dynamic Range camera (CM-215)

Comments to this Manuals

No comments

Openeye 200-Series Setup Manual User Manual

Browse online or download User Manual for Video surveillance systems Openeye 200-Series Setup Manual. OpenEye 200-Series Setup Manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Video surveillance systems Openeye 200-Series Setup Manual