Openeye Android MDVR User Manual

www.openeye.netMDVR HD for the AndroidInstructions

Disconnect From DVR Follow these steps to disconnect from a recorder. 1. Press the BACK button or press the MENU button on your device. 2. Tap D

PTZ control is available on cameras that are setup as PTZ on the connected recorder. You can Pan, Tilt, Zoom In, Zoom Out, and select Preset camera

To activate an alarm relay for the connected recorder, press the MENU button on your device and then tap Relays. Select a desired relay to activate

Basic Search is available on H.264 E-Series recorders and Professional recorders. Search is limited to one channel at a time. 1. In Live view, pre

4. Tap Channel and select the desired channel. 5. Use the Forward Play, Pause and Reverse Play controls to review video. 6. Tap Speed to chan

www.openeye.net 1-509-232-5261 © 2015 OpenEye All rights reserved. No part of this publication may be reproduced by any mean

OpenEye® Android MDVR Software Manual (Ver2.59) Manual Edition 30171AF – MARCH 2015 ©2015, OPENEYE All Rights Reserved. No part of this document

The OpenEye Android MDVR HD software allows you to access your OpenEye recorder from almost anywhere on your Android mobile device. With this app,

Commercial Recorder (E-Series) Verify that the E-Series recorder is connected to the network. Press SETUP on the front panel or IR remote control,

1. Launch the MDVR HD app. 2. Tap Add. 3. Select a DVR Type. 4. Type a DVR Name to identify the recorder. 5. Type the IP Address, Remote Port

When the recorder is connected, the screen will display four video channels at a time (quad view). Double-tap the channel for single view. To view

HD Video Double-tap your desired camera channel to set the camera to full screen, and then tap HD Video. The video will expand to the full resolut

Digital Zoom Digital Zoom will enable zooming into the image for live view or search. To use Digital Zoom in live view, double tap the desired chan

Snapshot Snapshot will capture and save the image of a selected channel to the storage directory of your device. To use Snapshot, select the desire